Current wish list for next versions:
- trigger the shutter by "light" via the built-in proximity sensor
- optional GUI rotation by 180° for smartphones with audio connector at "wrong" side
- persistant storage of timer and HDR parameters, respectivelly, as "profiles"
- "mirror lock-up" using a camera specific shutter delay ("2s", "3s" or the like)
- a more obvious distinction between "button pressed" and "button not pressed"
- option for cable S "S button without focus signal" to prevent the camera from focusing again on shutter release (after pre-focusing with the F button)
- motion trigger via the built in acceleration sensors
- motion trigger via live view of the camera
- GPS trigger (absolute und difference)
- option to write a GPS protocol with geo data for each picture taken
- continue running Timer or HDR sequence in the background (e.g. when the display is switched off)
- test option for an IR dongle
- bulb ramping in Timer mode
The sequence indicates in no way the significance of the subject. They will be addressed "as occasion arises".
21.10.2013 - DSLR Remote Plus - Version 1.0
Donate version with additional features:
- Integrated ND calculator
- Home screen widget for shutter release
- Control via the devices volume buttons
- Exposure end notification
- Video Start/Stop button for Sony NEX cameras
21.10.2013 - DSLR Remote - Version 1.9
- Random timer mode
- HDR exposure times up to 2h feasible
- Dispay of the remaining exposure / pause time in HDR mode
- Selectable IR-Signal to be used in Timer or Random mode ('S' or '2S', if available)
- Advanced Settings: frequency of the signals for cable control adjustable
08.09.2013 - Version 1.8.3
- Erweiterung des S4/Canon-Bug-Fix
15.08.2013 - Version 1.8.2
- Automatic volume control deactivated when using built-in IR blaster
- Galaxy S4 mini / Canon combo should be working now
30.07.2013 - Version 1.8.1
- Bug-Fix for the HTC One running JellyBean 4.2.2
02.07.2013 - Version 1.8
- Support for the built-in IR blaster of the HTC One [M7]
24.06.2013 - Version 1.7.1
- S4/Canon issue solved
29.03.2013 - Version 1.7
- Support for the built-in IR blaster of Samsung devices
22.02.2013 - Version 1.6.1
- Bug fix for astro mode
21.02.2013 - Version 1.6
- App2SD
- New setting: Trigger time adjustable (Cable mode)
- New setting: Option to show status bar
- New HDR setting: Optional dark frame related delay in HDR mode
- Advanced Settings: Swap Audio Channels (Cable mode)
- Advanced Settings: Choose Stream Type
05.03.2012 - Version 1.5
- Potential new cable hardware layout (referred to as "Cable S" in the settings; existing cable layout is from now on referred to as "Cable A")
- 1/3 EV and 2/3 EV steps in HDR mode possible
- Screen timeout is disabled during timer or HDR run to prevent timing process from stopping.
- Bug-Fix: "NumberPicker only accepts text input after clicking '+' or '-'"
- Bug-fix: "Crash when starting sequence of 9 shots in HDR mode"
31.01.2012 - Version 1.4.1
- Bug-Fix: "Crash when using audio trigger in Timer or HDR mode"
30.01.2012 - Version 1.4
- New feature "Audio Trigger"
- New option "mirror lock-up" in HDR mode
02.01.2012 - Version 1.3.2
- Bug fix: "Crash after settings change from 'Cable (Bluetooth)' to 'Infrared'"
- Bug fix: "A maximum of 200 shots can be set in timer mode"
18.12.2011 - Version 1.3.1
- Hints to the website in market screenshots and the app's info panel
16.12.2011 - Version 1.3
- New feature "Light Trigger"
- New feature "Cable control via Bluetooth"
- New Setting (Display) "Orientation" to choose a screen orientation
- Bug fix: "GUI resets on screen rotation"
- Limitation of the available shutter speeds in HDR mode when using IR remote control (according to the chosen camera type/brand)
- Adjustment of the shutter signal of the cable control, to ensure correct long time bulb exposures in remote mode
01.12.2011 - Version 1.2
- New setting (Display) "Brigthness" to reduce screen brightness while running a timer or HDR sequence
- New setting (Display) "Keep screen on" to prevent a display timeout, turning off the screen automatically
- Bug fix: "Canceling a HDR sequence run doesn't work with cable control"
26.11.2011 - Version 1.1.1
- Correction of a small error in the Nikon IR protocol which prevented it from working with IR capable Nikon accessories like the Meike battery pack
- Longer pauses between shots in HDR mode possible (up to 10 minutes)
22.11.2011 - Version 1.1
- The set values in Timer and HDR frame, respectively, are saved
- Timer controlled HDR bracketing (set HDR sequence values first, then in Timer frame press the menu button and choose HDR)
- Astro mode (red lettering on dark background) for dazzle free display in night operation
15.11.2011 - Version 1.0.1
- visualization of the parametrized sequence in HDR mode, including highlighting the current shot or pause
07.11.2011 - Version 1.0
- Internationalization (default=English, additional=German)
- new Icon
- Published on Android Market
26.10.2011 - Version 0.9.1
- global setting "Trigger" for cable control bulb mode ("Shutter", "Shutter and Focus" and "Focus then Shutter")
- global setting "Lead Time" for trigger type "Focus then Shutter" (0...250ms)
25.10.2011 -Version 0.9
- re-implementation of the timing control (should result in more acurate shutter speed)
- HDR function complete (with settings for delay between two consecutive shots and the highest shutter speed possible)
- redesign of the info frame
22.10.2011 - Version 0.8.2
- automatic volume control
- improved canon IR profile (?)
20.10.2011 - Version 0.8.1
- profile visualization in the title now with display of the remote type (Infrared/Cabel)
- first HDR beta version
16.10.2011 - Version 0.8
- cable control complete (S und F generate permanent signals as long as the particular button is pressed; bulb mode in timer mode)
- info frame with content
12.10.2011 - Version 0.7
- Sony protocoll changed and functional
- bug "sometimes black colored text on timer buttons" eliminated
- cable signal optimized and two signal channels established
11.10.2011 - Version 0.6
- redesign of the entire GUI
10.10.2011 - Version 0.5
- redesign of the GUI of the remote frame
- Visualization of the chosen camera profile (brand) in the title
06.10.2011 - Version 0.4
- added IR protocol for Minolta and Fuji - additional features W and T (zooming) together with + and - (Focus) for Olympus
- bug “crash by fierce clicking” eliminated
05.10.2011 - Version 0.3
- added IR protocol for Olympus
- bulb mode
- plausibility check for interval time and shot count (maximum of 1 shot, if interval is deactivated or set to 00:00:00)
04.10.2011 - Version 0.2
- added IR protocol for Canon, Nikon und Sony
03.10.2011 - Version 0.1
- first beta version of the remote and the timer mode
- Pentax IR protocol
